Thursday, April 4, 2013

2005 Scion XB Drive belt replacement


  1. REMOVE FAN AND GENERATOR V-BELT
    1. Loosen bolts A and B.
    2. Release the V-ribbed belt tension and remove the V-ribbed belt.
  1. REMOVE RF WHEEL AND REMOVE ENGINE UNDER COVER RH



  1. REMOVE VANE PUMP V-BELT
    1. Loosen bolts A and B.
    2. Release the V-ribbed belt tension, and remove the V-ribbed belt.
  1. INSTALL VANE PUMP V-BELT
    1. Temporarily install the V-ribbed belt on each pulley.
  1. INSTALL FAN AND GENERATOR V-BELT
    1. Temporarily install the V-ribbed belt on each pulley.
  1. ADJUST FAN AND GENERATOR V-BELT
    1. Insert the adjusting bar between the engine RH mount bracket and generator. Push the bar towards the vehicle front to adjust the V-ribbed belt tension. NOTICE: Do not insert the bar between the oil control valve and generator. It could damage the oil control valve.
TIP:  IF YOUR THE DRIVE BELT SQUEALS AND/OR VIBRATES. IT IS TOO LOSE. TIGHTEN BUT NOT TOO TIGHT.


No comments:

Post a Comment